Caterpillar WHEEL LOADERS 928G - catalog of spare parts
Bucket
Unloading clearance at maximum lift - 9.45 feet per
Dimensions
Length with bucket on the ground - 23.9 feet in
Tire Width 8.1 ft.
Height to Cab Top - 10.8 Feet in
Total height - 16.4 feet in
Ground clearance - 1.4 feet in
Reach in Max Lift and Dump - 3.1 feet in
Total length - 23.1 feet in
Wheelbase - 9.6 feet in
Height - Top of Hood - 87.6 inches
Dump angle at maximum lift - 45 degrees
Width - Tire - 77 ft.
Height - Top ROPS / FOPS - 10.8 feet per
Height - Top of Exhaust Pipe - 10.6 ft.
Height - center axis - 2.3 feet in
Front axle center line to hitch 4.9 ft.
Wheelbase 9.6 ft. In
Ground clearance at maximum lift - 45 degrees - 9.5 feet in
Bucket Clearance - Maximum Lift / Carry - 12.4 Feet
Reach at Maximum Lift and 45 Degree Dump - 3 feet in
A-pillar angle - maximum lift - 58 degrees
Rear corner of the rack - ground - 44 degrees
Rear Post Angle - Wear - 47.8 degrees
Bearing Height - 3 feet in
Total Height - Bucket Raised - 16.4 Feet
Bucket Finger Height - Maximum Lifting Height - 12.4 Feet
Length - from rear axle to bumper - 6.4 ft.
Digging Depth - 3.4 inches
Choose WHEEL LOADERS 928G section:
Specifications
engine
Engine Model - 3116T
Net power - 125 hp
Displacement - 366cu in
4 inch diameter
Stroke - 5 inches
Rated net power - 143 hp
SAE J1349 (2) - 155 HP
ISO 9249 (1997) (2) - 156 HP
EEC 80/1269 (2) - 156 HP
SAE J1349 (1) - 143 HP
ISO 9249 (1997) (1) - 145 HP
EEC 80/1269 (1) - 145 HP
Maximum net power - 2000 rpm - 155 hp
Operational
Operating Weight - 25699.3 lbs.
60.8 gallon fuel tank capacity
Hydraulic system capacity - 33.1 gallons
Static Tipping Weight - 20,350.9 lbs.
Transmission
The number of forward gears - 4
Number of reverse gears - 3
Top Speed - Forward - 22.9 mph
Max. Speed - reverse - 15.3 km / h
Forward - 1 - 4.9 mph
Reverse - 1 - 4.9 mph
2 - 7.8 mph
3 - 16 miles per hour
4 - 23.4 mph
Steering
Turning angle - in each direction - 40 degrees
Minimum turning radius - above tires - 206 inches
Steering Cylinder, Two, 2.8 inch Hole
Hydraulic power at 2300 rpm of the engine and 6900 kPa (1000 psi) - 27 gallons / min
Maximum working pressure - 3000 psi
Weights
Working Weight - 27,140 lbs.
Tires
Tread Width - 96 Feet
Size - 17.5-25PR (L-2)
Buckets
Bucket volume - 1.9 m3 - 2.3 m3 2.5 m3 - 3.0 m 3
Hydraulic system
Lifting Time - 6.1sec
Dump time - 1.2 sec.
Shorter time - 2.8 s
Bucket
Breakout Power - 25,849 pounds
Unloading clearance at maximum lift - 9.5 feet per
Bucket Width - 8.4 Feet in
Bucket Capacity - Piled - 2.3yd3
Axes
Axle Wheel - 11 degrees
Dimensions
Length with Bucket on Ground - 23.81 Feet in
Tire Width - 8.01 ft. In
Height to Cab Top - 10.73 Feet in
Ground clearance - 1.4 feet in
Reach at Max Lift and Dump - 3.05 feet in
Performance characteristics
Static Tipping Load - Full Turn - 18,018 lbs
Breakout Power - 25,849 pounds
Joint angle - 40 degrees
Achieve - full lift and 45-degree drop - 3 feet in
Discharge clearance at full lift and a 45 degree dump angle - 9.5 feet per
Service replenishment options
Cooling system - 11.1 gal
Fuel Tank - 59.4 Gallons
Carter - 4.2gal
Hydraulic Tank - 18.5 Gallon
Hydraulic system - including tank - 33gal
Transmission - 9.1 gal
Front - 6.9gal
6.6gal behind
Taxi
ROPS - SAE J1040 MAY94, ISO 3471-1994
FOPS - SAE J231 JAN81, ISO 3449-1992 Level II
Loader hydraulic system
Pressure Relief Valve Installation - 3600 psi
Pump Consumption - Implement Pump - 40.15 gal / min
Productivity at 2300 rpm of the engine and 6900 kPa (1000 psi) when using SAE 10 W oil at a temperature of 65 degrees C (150 degrees F) - 40.3 gallons / min.
Rise - 6.1 s
Blade - 1.2 s
Lower, lower, lower - 2.8 s
Total 10.1 s
Hole (1) - 4.8 inches
Stroke (1) - 27 inches
Hole (2) - 5 inches
Stroke (2) - 21.7 inches
Hydraulic cycle time - 10.1 s